PRODUCTS CATEGORIES
CQB30L-32 Residual Current Operated Circuit Breaker with Over-current Protection (Electronic)
1 Application
CAB30L-32 Residual Current Breakers with Overload Protection RCBo is be used for protection against overload and short-circuit currents; protection against the effects of sinusoidal alternating and direct pulsating earth fault currents; protection against indirect contacts and additional protection against direct contacts; command and isolation of resistive and inductive loads. Suitable for commercial and industrial applications.
Compliant standard: IEC61009-1
2. Type designation
3 Technical data
| Specifications | |
|
Rated voltage(v) : |
230V~ |
|
Rated current(A) : |
6A、10A、16A、20A、25A、32A |
|
Rated sensitivity lrn (mA) |
30mA、100mA、300mA |
|
Rated residual non-operating current |
0.5lrn |
|
Poles : |
1P+N |
|
Rated breaking capacity lcu(A) |
3000A |
|
Tripping time |
Table 1 |
|
Tripping characteristics |
Table 2 |
|
Mechanical life & Electrical life |
Mechanical life：4000 ；Electrical life: ：2000 |
|
Nominal cross section area (mm2) |
10mm2 |
|
Pollution degree |
2 |
|
Protection class |
IP20 |
|
Overvoltage category |
Ⅱ |
Table 1 Tripping time:
| ln (A) | l(n (mA) | Operating time:（s） | ||
|
l(n |
2l(n |
5l(n |
||
|
6~32 |
30、100、300 |
0.2 |
0.1 |
0.04 |
Table 2 Tripping characteristics :
| Curve | Test current | Initial status | Tripping time | Test result | Remarks |
|
B，C，D |
1.13In |
Cold |
t≤1h |
Non-tripping |
|
|
B，C，D |
1.45In |
Following No.1 test |
t＜1h |
tripping |
Current smoothly rises to specified value in 5s |
|
B，C，D |
2.55In |
Cold |
1s＜t＜60s(≤32A)
1s＜t＜120s(＞32A) |
tripping |
|
|
B
C
D |
3In
5In
10In |
Cold |
t≤0.1s |
Non-tripping |
Switch on the power supply by closing the auxiliary switch |
|
B
C
D |
5In
10In
20In |
Cold |
t＜0.1s |
tripping |
Switch on the power supply by closing the auxiliary switch |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 Operating conditions.
4.1 Ambient temp. range:-5℃~+40 ℃，average temperature in 24 hours not exceed +35℃
4.2 Altitude:≤ 2000m;
4.3 At mounting site, relative humidity not exceed 50% at the max temperature of +40 ℃，higher relative humidity is allowable under lower temperature, for example ,RH could be 90% at +20 ℃
4.4 Mounting type : Din rail embedded(TH35-7.5)
4.5 Installation conditions
Any direction of the outer magnetic field of the installation site should not exceed 5 times than earth's magnetic field; residual current operated circuit breaker should be mounted vertically, all places inclination no more than 5 °,power position above the handle , the installation place should be no significant impact and vibration.
5. Dimensions ( unit:mm)
